Maxtor MaXLine III 7B250S0 Quickspecs

MaXLine III SATA Hard Disk Drive Family
CAPACITIES:
MODEL
7B250S0
7B300S0
SATA = Serial ATA
Attaching SATA Power Cables:
PLEASE NOTE:
Unlike standard ATA drives, Serial ATA drives DO NOT
require the use of jumpers to configure the drive. Please disregard any
references to jumper settings and Master, Slave and Cable Select
configurations in the Maxtor Installation Guide
Document #: 42104
Date: 6/21/04
ACT CYLS HDS:SECT
486,344 16:63
588,422 16:63
.
SATA Interface Cable Requirements:
7-pin Serial ATA interface cable (Gen. 1- or Gen. 2-compliant) up to 1 meter in length.
MAX CYLS MAXLBA
16,383 490,234,752
16,383 593,129,376

Key Features:

Misc Drive Info:
For more information on step-by-step
installation procedures, troubleshooting
procedures and more go to the Maxtor.com
Knowledge Base.
GB = 1 billion bytes. Total accessible
capacity varies depending on operating
environment.
Q
UICK
GB CAPACITY
250GB
300GB
• SATA interface
• Burst Data Transfer Speeds
up to 150 MB/sec
• Up to 300GB capacities
• 9.3 ms average seek time
• 16MB Cache Buffer
• 100% FDB Motors
• 7200 RPM
S
PECS
Rev: 00