Beko CFD 7914 Installation, Operating And Maintenance Instructions page 19

Frost free combi fridge freezer
Table of Contents

Advertisement

tank. Clean the water tank with warm
clean water, reinstall the top cover
mechanism and fasten the latches.
When installing the water tank, make
sure that hooks behind it fits securely
into the hangers on the door. Make sure
that parts removed during cleaning (if
any) are installed correctly into their
original locations. Otherwise, water
may leak.
Important:
Water tank and components of water
dispenser are not dishwasher-proof.
Water tray
Water that drips while using the water
dispenser accumulates in the drip tray
housing.Remove the drip tray firstly
pressing up from the front edge then
pulling towards yourself.Then clean
drip housing by a fabric or sponge that
has water absorbtion tendency.
Safety lock for Water Dispenser
You may use the lock in order to avoid
small children tampering with the water
dispenser. To do this, slide the locking
latch from left to right as illustrated in
the figure. You must slide the latch
back to left position in order to use the
water dispenser.
To avoid accidental water dispensing,
we recommend you to lock the water
dispenser.
UNLOCK
Maximum height of glass suitable for
use with Stored Water Dispenser is
16 cm which includes most of the
"Standard" pint glasses.
18
EN
LOCK

Advertisement

Table of Contents
loading

Table of Contents