Texas Instruments TI-84 Plus Instructions

Graphing calculator

Hide thumbs Also See for TI-84 Plus:

Download this manual See also: Maintenance and Care, Manual

Press-to-Test for TI-84 Plus & TI-84 Plus Silver Edition

TI-84 Plus & TI-84 Plus Silver Edition

Printed in U.S.A.

Press-to-Test

This feature will delete all RAM and Archive except for the disabled Apps

and Programs when using operating system 2.40 or greater.

SET-UP INSTRUCTIONS

Step 4

Step 6

RESTORE INSTRUCTIONS ON REvERSE SIDE.

Step 7

Step 8

CL8806.02

Begin with the graphing calculator powered OFF.

Hold down both the LEFT and RIGHT arrow keys and press ON –

all three keys simultaneously.

Release and the calculator will start with the RESET OPTIONS screen.

By default, ANGLE mode is set to DEGREE and STAT DIAGNOSTICS are ON.

To change settings, use the ARROW keys and press

(These are the default settings for the calculator.)

Once your selections have been completed, press OK.

(press the ZOOM button located just below the screen).

The RESET COMPLETE screen will appear. Press any key to continue.

Press the APPS key, which should display an

"APPS HAvE bEEN DISAbLED" message.

Press the PRGM key, which should display a

"PROGRAMS HAvE bEEN DISAbLED" message.

= illustration shown.

Your Passion. Our Technology. Student Success.

™

Page 1 Press-to-Test for TI-84 Plus & TI-84 Plus Silver Edition Press-to-Test This feature will delete all RAM and Archive except for the disabled Apps and Programs when using operating system 2.40 or greater. SET-UP INSTRUCTIONS Begin with the graphing calculator powered OFF.
Page 2 RESTORE OPTION 2 Using an I/O unit-to-unit cable (which comes with the Testing Solutions Tool Kit), or USB cable (which comes with TI-84 Plus models), connect together two graphing calculators – at least one of the two units should be “temporarily disabled. ”...

Ti-84 plus silver edition