Basic Operations; Entering Data; Selecting Patches - Creative Xboard25 Owner's Manual

XBoard mini.book Page 21 Thursday, April 21, 2005 11:09 AM

Basic Operations

BASIC OPERATIONS

Entering Data

There are two ways to enter data from the X Board front panel.
• Data Slider - Move the slider to select the data value.
• Keyboard Data Entry - The black and white keyboard keys marked with
numbers can be used to directly enter data values (except when changing the
MIDI channel number or storing and selecting patches).

Selecting Patches

The X Board can hold 16 patches in its internal memory. A patch contains the
settings for all user programmable controls of the X Board.
In addition, depending on the patch settings, the X Board can send MIDI program
changes message(s) and initial controller settings for the knobs, wheels and
footswitch/pedal when a particular patch is selected.
To Select a Patch
1. Press the Patch Select button, illuminating the LED.
2. Select the desired patch number using the data slider.
3. The Enter button will be flashing. Press Enter to confirm the operation. Press
Home to cancel the operation.
DATA ENTRY / MASTER VOLUME
Store
2
X Board
1
OCTAVE TRANSPOSE
Panic
3
To Select a Patch:
1. Press Patch Select
2. Select Patch using
the Data Slider
3. Press Enter.
21