Zanussi ZKN7147J User Manual page 16

For the compatibility among the washing pro-
grammes and the options see chapter «Wash-
ing programmes».
Select an additional rinse
This appliance is designed for saving water.
However, for people with a very delicate skin
(allergic to detergents) it may be necessary to
rinse the laundry using an extra quantity of wa-
ter (Extra Rinse). To activate this option press
simultaneously the buttons 4 and 6 for some
seconds. The pilot light 9 illuminates. This func-
tion stays permanently on. To remove it press
the buttons 4 and 6 again until the pilot light 9
goes off.
Start the programme by pressing button 7
To start the selected programme, press this
button; the corresponding green pilot light
stops blinking.
The pilot light 9 illuminates to indicate that the
appliance starts operating and the door is
locked.
If you have chosen a delayed start, the machine
will begin the countdown.
Important! If an incorrect option is selected,
the message Err is displayed for a few seconds
and the red pilot light of this button blinks 3
times.
Select the Delay Start by pressing button
8
Before you start the programme, if you wish to
delay the start, press this button to select the
desired delay.
The selected delay time value will appear on
the display for a few seconds, then the duration
of the programme will appear again.
You must select this option after you have set
the programme and before you start the pro-
gramme.
You can cancel or modify the delay time at any
moment, before you press button 7.
Selecting the delay start :
1. Select the programme and the required
options.
2. Select the delay start by pressing button 8.
3. Press button 7:
- the machine starts its hourly countdown.
16
- the programme will start after the selec-
ted delay has expired.
Cancelling the Delay Start after having started
the programme:
1. Set the washing machine to PAUSE by
pressing button 7.
2. Press button 8 once. On the display will
appear '.
3. Press button 7 again to start the pro-
gramme.
Important!
• The selected delay can be changed only af-
ter selecting the washing programme again.
• The door will be locked throughout the delay
time. If you need to open the door, you must
first set the washing machine to PAUSE by
pressing button 7 and wait a few minutes be-
fore opening the door. After you have closed
the door, press the same button again.
Important! The Delay Start cannot be
selected with the draining programme.
Altering an option or a running
programme
It is possible to change some options before
the programme carries them out.
Before you make any change, you must pause
the washing machine by pressing button 7.
Changing a running programme is possible only
by resetting it. Turn the programme selector di-
al to and then to the new programme posi-
tion. Start the new programme by pressing but-
ton 7 again.
The washing water in the tub will be not emp-
tied out.
Interrupting a programme
Press the button 7 to interrupt a programme
which is running, the corresponding pilot light
starts blinking. Press the button again to re-
start the programme.
Cancelling a programme
Turn the selector dial to
gramme which is running. Now you can select a
new programme.
to cancel a pro-
www.zanussi.com