Adjust The Oven Thermostat—Easy To Do Yourself - GE RB758 Owner's Manual

Electric coil & radiant ranges
Hide thumbs Also See for RB758:
Table of Contents

Advertisement

Adjust the oven thermostat—Easy to do yourself!
You may find that your new oven cooks differently than the one it replaced. Use your new oven for a few weeks to
become more familiar with it. If you still think your new oven is too hot or too cold, you can adjust the thermostat yourself.
Do not use thermometers, such as those found in grocery stores, to check the temperature setting of your oven.
These thermometers may vary 20–40°F.
NOTE: This adjustment will not affect the broiling or the self-cleaning temperatures (on some models). The adjustment
will be retained in memory after a power failure.
Front of OVEN TEMP knob
(knob appearance may vary)
Pointer
Back of OVEN TEMP knob
(knob appearance may vary)
OVEN
TEMP
Front of OVEN TEMP knob
(knob appearance may vary)
Back of OVEN TEMP knob
(knob appearance may vary)
To Adjust the Thermostat with this Type of Knob
Pull the OVEN TEMP knob off the range
and look at the back side. To make an
adjustment, loosen (approximately one
turn), but do not completely remove, the
two screws on the back of the knob.
To increase the oven temperature,
move the pointer toward the words
"MAKE HOTTER."
To decrease the oven temperature, turn
the pointer toward the words "MAKE
COOLER."
To Adjust the Thermostat with this Type of Knob
Pull the OVEN TEMP knob off the range
and look at the back side. To make an
adjustment, loosen (approximately one
turn), but do not completely remove, the
two screws on the back of the knob.
With the back of the knob facing you,
hold the outer edge of the knob with one
hand and turn the front of the knob with
the other hand.
To increase the oven temperature, move
the top screw toward the right. You'll
hear a click for each notch you move
the knob.
To decrease the oven temperature,
move the top screw toward the left.
To Adjust the Thermostat on Other Models
Touch the BAKE and BROIL HI/LO pads
at the same time for 3 seconds until
the display shows SF.
Touch the BAKE pad. A two digit number
shows in the display.
The oven temperature can be adjusted
up to (+) 35°F hotter or (–) 35°F cooler.
Touch the + pad to increase the
temperature in 1 degree increments.
Touch the – pad to decrease the
temperature in 1 degree increments.
GEAppliances.com
Each click will change the oven
temperature approximately 10°F. (Range
is plus or minus 60°F from the arrow.) We
suggest that you make the adjustment
one click from the original setting and
check oven performance before making
any additional adjustments.
After the adjustment is made, retighten
screws so they are snug, but be careful
not to overtighten.
Replace the knob, matching the flat
area of the knob to the shaft, and check
performance.
Each click will change the oven
temperature approximately 10°F. (Range
is plus or minus 60°F from the arrow.)
We suggest that you make the
adjustment one click from the original
setting and check oven performance
before making any additional
adjustments.
After the adjustment is made, retighten
screws so they are snug, but be careful
not to overtighten.
Replace the knob, matching the flat area
of the knob to the shaft, and check
performance.
When you have made the adjustment,
touch the START/ON pad to go back to
the time of day display. Use your oven
as you would normally.
NOTE: This adjustment will not affect the
broiling or self-cleaning temperatures. It will
be retained in memory after a power failure.
21

Advertisement

Table of Contents
loading

Table of Contents