Adding The Chorus Effect To The Tone; Adjusting Acoustic Piano Sound Characteristics - Casio AP-650M User Manual

Using Built-in Tones
Adding the Chorus Effect to
the Tone
1.
While holding down the
button, press the
This will display a chorus type selection screen.
2.
(w, q) buttons to select the
Use the ct
chorus type you want.
• The following shows the five available chorus type
settings.
0: OFF (no chorus)
1: Light Chorus
2: Chorus
3: Deep Chorus
4: Flanger
3.
Press the cs (FUNCTION) button.
This exits the chorus type selection screen.
Adjusting Acoustic Piano
Sound Characteristics
The tones of your digital piano have built-in elements
that give them the characteristic reverberation of an
acoustic piano. Each of these elements can be
individually adjusted to one of four levels.
HAMMER RESPONSE
Controls the time deviation between when a key is
pressed and when the note actually sounds.
Settings
1: Fast 2: Grand piano feel 3: Slightly slower
4: Slow
STRING RESONANCE
Adjusts the characteristic reverberation (string
resonance) of an acoustic piano.
You can select a reverberation setting that matches
the song being played or your own personal
preference.
Settings
1: Suppressed 2: Slightly suppressed
3: Reverberation 4: Strong reverberation
E-10
cs (FUNCTION)
dl (CHORUS) button.
LID SIMULATOR
Adjusts how sound resonates in accordance with the
opening state of a grand piano lid.
Settings
1: Lid closed 2: Lid opened slightly 3: Lid fully open
4: Lid removed
NOTE
• Opening or closing the digital piano's lid does not
affect the LID SIMULATOR setting.
1.
While holding down the
button, press the button that corresponds to
the element whose setting you want to
change.
2.
(w, q) buttons to select the
Use the ct
settings type you want.
3.
cs
Press the (FUNCTION) button.
This exits the element type selection screen.
NOTE
• In addition to the above, piano tones also have a
KEY OFF SIMULATOR.
KEY OFF SIMULATOR
Causes notes to decay when keyboard keys are
released.
cs (FUNCTION)