Miele FN 11827 S Operating And Installation Manual page 42

Changing the door hinging
Changing over the door
^ Close the appliance door.
^ Remove cover a by sliding it
forwards from the back and then
lifting it off.
^ Remove cover b by pulling it
upwards.
Caution. The appliance door is not
secure once the hinge plate has
been removed.
^ Loosen screws d in upper hinge
plate c and pull it upwards and off.
^ Carefully lift the door off and place it
to one side.
^ Carefully ease off cover e from
above using a screwdriver and then
take it off together with retaining plate
f.
^ Then separate retaining plate f from
cover e, by pushing it slightly to the
left and then pulling the cover
forwards and off.
^ Rotate retaining plate f by 180°.
^ Then fit cover e from the front over
retaining plate f, and slide it over to
the right. The writing must be visible.
42
^ Remove cover g, then rotate it by
180° and fit it on the opposite side.
^ Then fit cover e together with
retaining plate f on the opposite
side.