Singer 2210 Instruction Book

Singer 2210 Instruction Book

Electronic sewing machine

Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2210 and is the answer not in the manual?

Questions and answers

Musibau Aminat Ayodele
January 16, 2025

The feed dog is not moving

2 comments:
Mr. Anderson
February 3, 2025

If the feed dog on your Singer 2210 sewing machine is not moving, it could be due to several reasons:

1. Feed Dog Position: Check if the feed dog is lowered. Some sewing machines have a lever or knob to raise and lower the feed dog for free-motion sewing. Ensure it is set to the "up" position.

2. Stuck or Jammed Mechanism: Lint, thread, or debris may have accumulated under the needle plate, preventing the feed dog from moving. Remove the needle plate and clean the area thoroughly.

3. Broken or Worn Parts: The feed dog mechanism may have worn out or broken components, such as gears or linkages. Inspect the internal mechanism and replace any damaged parts.

4. Incorrect Stitch Settings: Ensure the stitch length is set to a proper value. If the stitch length is set to "0," the feed dog will not move the fabric.

5. Timing or Mechanical Issues: Internal timing or alignment problems may prevent the feed dog from moving. In such cases, professional servicing may be required.

6. Motor or Drive Belt Problems: If the motor or the drive belt is not functioning properly, it may prevent the feed dog from moving.

Ensure the machine is clean, properly threaded, and correctly set up. If the problem persists, consult a professional technician.

This answer is automatically generated

Mary
March 4, 2025

i get ol error message

Subscribe to Our Youtube Channel

Table of Contents

Save PDF