REVELL KIT 1743 Assembly Manual

®
During the 1960's, the
lack of effective close
air support aircraft led
to the creation of the
Bell UH-1B "Huey"
Gunship. Fitted
various guns,
armed helicoptors were
used quite success-
fully in Southwest Asia.
Your Revell model is
fitted with two externally
mounted .50 caliber ma-
chine gun pods and spin-
ning main and tail rotors.
* APPLY STICKER
* APPLIQUEZ LES AUTO-COLLANTS
READ BEFORE YOU BEGIN
• CLEAR A SPACE TO WORK ON
• STUDY THE ASSEMBLY DRAWINGS
BEFORE YOU BEGIN
• EACH PLASTIC PART IS IDENTIFIED BY
A PART NUMBER
• SEE NOTE ABOUT APPLYING
STICKERS IN STEP #7
CAUTION:
POSITION ALL PARTS IN THIS KIT
CAREFULLY. PARTS WILL ONLY SNAP
TOGETHER ONCE.
If you have any questions or comments, call our hotline at:
Revell Inc Consumer Service Department, 1840 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85174310200), part number, description, your return address and phone number.
KIT 1743
with
these
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2009. All rights reserved.
HUEY CHOPPER
Á LIRE AVANT DE COMMENCER
• DÉGAGGEZ UN ESPACE POUR
TRAVAILLER.
• ÉTUDIEZ LES ÉTAPES DE MONTAGE
AVANT DE COMMENCER.
• CHAQUE PIÉCE EN PLASTIQUE PORTE
UN NUMÉRO DE PIÉCE.
• LISEZ LA RE MARQUE CONCERNANT
L´APPLICATION DES AUTO-COLLANTS,
´A L´ ÉTAPE 7.
POSITIONNEZ AVEC PRÉCAUTION
TOUTES LES PIÉCES DE CE MODÉLE
RÉDUIT, CAR VOUS NE POUVEZLES
EMBOîTER QU'UNE SEULE FOIS.
or, please write to:
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
MISE EN GARDE:
(800) 833-3570
85174310200