Air Adjustment; Leveling The Range - GE JGB295 Owner's Manual And Installation Instructions

aDJUST THe BaKe aND BRoIl
8
BURNeR aIR SHUTTeRS
IF NeCeSSaRy
what adjustment to make:
A. If the flames are yellow, open the air shutter more than
the original setting.
B. If the flames blow away or flutter from the burner, close
the air shutter more than the original setting.
making the adjustment
A. Locate the Air Shutter
The air shutter for the bake burner is near the
back wall behind the storage drawer, warming
drawer or kick panel. Remove the drawer or
panel. See the Care and cleaning of the range
section.
The air shutter for the broil burner is accessible in the top
rear of the oven.
B. Using a screwdriver, loosen the air shutter adjustment
screw.
C. Make the air shutter adjustment.
D. Retighten the air shutter screw.
E. Check that the inner cone of the flame is between ½"
and ¾" (12.7 mm and 19.1 mm) long.
after confirming correct burner operation,
replace all parts
Installation Instructions
50
9

leVelING THe RaNGe

a. Install the oven racks in the oven and position
the range where it will be installed.
B. Check for levelness by placing a spirit level or a cup,
partially filled with water, on one of the oven racks.
If using a spirit level, take two readings—with the level
placed diagonally first in one direction and then the
other.
C. Remove the drawer. See the Care and cleaning of the
range section. The front leveling legs can be adjusted
from the bottom and the rear legs can be adjusted
from the top or the bottom.
D. Use an open-end or adjustable wrench to adjust the
leveling legs until the range is level.
e. After the range is level, slide the range away from the
wall so that the Anti-Tip device can be installed.