Sound Menu; Remote Control Operation; Timer Menu; Picture Menu - Sanyo CE24WN5-B Instruction Manual

TV controls
Programme position
Press the 5 and 6 to increase or decrease the programme
position.
Sound Volume Control
Increase or decrease the sound Volume by pressing the 1 or
2 buttons.
Volume

Remote control operation

All aspects of your televisions operation can be controlled by Remote
Control.
Many of your TV's functions are controlled through the menu func-
tion.
During the menu operation the following buttons are used.
u : To enter the menu function.
To go back and to exit the menu function.
: To navigate up and down in the menus.
: To navigate forwards to the next screen or
to activate settings.

Picture menu

1. Press the MENU button.
2. Select Picture.
Picture
Sound
Timer
Setting
Preset
Select from the following and adjust to obtain the best picture
settings for your environment.
Brightness : To adjust brightness levels.
Contrast : To adjust Contrast levels.
Colour : To adjust Colour levels.
Sharpness : To adjust Sharpness levels.
Text bright : (Brightness of Teletext screen)
MINIMUM / CENTRE / MAXIMUM.
Memory : To store personal settings.
Tint : (colour phase if NTSC equipment is detected.)
Storing personal preferences
If you have altered any of the settings in the Picture menu you can
store them. They can be recalled again later if you wish to change
them again.
4
GENERAL OPERA
GENERAL OPERA
P
10
Brightness
Contrast
Colour
Sharpness
Text bright
memory?
TION
TION
In the picture menu select memory.
Brightness
Contrast
Colour
Sharpness
Text bright
memory ?
Press the 1 button, a tick appears in the box and the settings are
stored.
Press the MENU button repeatedly to return to normal TV picture.

Sound menu

1. Press the MENU button.
2. Select Sound.
Picture
Sound
Timer
Setting
Preset
Select from the following and adjust to obtain the best sound
settings for your environment.
Volume : To adjust sound volume.
Bass : To adjust low frequency sounds.
Treble : To adjust high frequency sounds.
Balance : To equalise the output from the left and right speakers.
Press the MENU button repeatedly to return to normal TV picture.

Timer menu

On-timer setting
The On-timer will switch the TV on from the standby mode or change
programme positions when the selected time has elapsed.
1. Press the MENU button .
2. Select Timer.
Picture
Sound
Timer
Setting
Preset
When the time period --:-- is selected its colour changes to yellow. The
time changes in 15 minute steps with a maximum of 24:00hrs.
Time period
02
01
01 30 --
ON-Timer
AV3
AV2
When the start up programme position -- is selected its colour changes
to yellow.
ON-Timer 01 30 05
When you are ready to store your settings press the 1 button and
both the time period and the start up programme numbers turn green
in colour. The tick appears as shown above and turns yellow.
If you switch your TV into standby it will switch on after the time
elapses. If you do not switch into standby it will switch to the selected
programme position.
If the TV set is switched on by on timer the TV will automatically
switch into Standby 3hrs if no keys are pressed. This is a safety
feature to ensure that you are aware that the TV set is functioning.
memory
Volume
10
Bass
Treble
Balance
00:30
00:15
ON-Timer -- -- --
OFF-Timer
24:00
23:45
Programme
position
ON-Timer 01 30 05
Not set
Set