GE JCP67 Use And Care & Installation Manual page 24

Before a Clean Cycle
The range must be completely cool in order to set
the se~-clean cycle.
Remove the brofler pan, broiler rack, dl cookware
1.
and any rdurninum foil from the oven—they can't
withstand the high cleaning temperatures.
the self-cleaning oven. However, they will darken,
lose their luster and become hard to slide. Wipe the
shelf supports with @eking oil after self-cleaning
to
make shelves slide more easily.
2. Wipe up heavy soil on the oven bottom. H you
use soap, rinse thorou@y before seU+leaning
to prevent staining.
element. Any soil will burn off when the elements
are heated. The bake element can be lifted gendy
to clean the oven floor. H spillovers, residue or ash
around the element with warm water.
3. Clean spatters or sofi on the oven front frame and the
oven door outside the gasket with a dampend cloth.
The oven front frame and the oven door outside the
gasket do not get cleaned by the self-clean cycle.
How to Set the Oven for Cleantig
Turn the OWN SET and the OWN ~MP knobs
1.
CLEAN.
to
2. Make sure that both the range clock and the START
STOP time did on the timer to the desired cleaning
time, MS autornatidly locks the door. (3 hours for
normal cleaning time.)
Right Oven on Model JCP67
en Front Frame
Openings in Door
these areas, use detergent and hot water or a
On
soap-filled steel wool pad. Rinse well with a
vinegar and water solution. This wtil help prevent
a brown residue from forming when the oven is
heated. Buff these areas with a dry cloth. Do not
clean the gasket. Never use a commercial oven
cleaner in or around the self-cleaning oven.
Clean sides and outside front of the oven
the top,
door with soap and water. Do not use abrasives or
oven cleaners.
Make sure the oven light bulb cover is in place.
Do not rub or clean the door gasket—
the fiberglass matend of the gasket has an
extremely low resistance to abrasion. An intact
and well-fitting oven door gasket is essential for
energy-efficient oven operation and good baking
results. If you notice the gasket becoming worn,
frayed or &rnaged in any way or if it has become
displaced on the door, you shotid have it replaced.
Do not let water run down through openings in
To help prevent water from
the top of the door.
getting in these slots when cleanin g, open the door
as far as it will go.
4. Close the oven door and make sure the oven
light is off. If the oven light is not turned off,
the life of the bulb will be shortened or it may
bum out immediately.
Do not use commercial oven cleaners or oven
A combination of any of these products plus the
high clean-cycle temperature may damage the
porcelain finish of the oven.
The Oven Cleaning Light
The Oven Cycling Light til be on. It will cycle
off and on when your oven has reached the clean
temperature.
The door til automaticrdly urdock when the oven
switch is turned off and the Oven Cleaning Light
is off.
will be on continuously.