REVELL KIT 7691 Assembly Manual

Americans love to have their own individual identity
whether we're speaking of clothing, hairstyles or anything
else. Those folks will likely love the new Chevrolet
The SSR, which officially stands for Super Sport Roadster,
refuses to be categorized into any existing niche. The
finished product is a pleasing combination of different fla-
vors and shapes, unlike anything previously released by
Chevrolet or anyone else, for that matter.
With seating capacity for two, it's a personal sort of
vehicle, but has an abundance of room for your other stuff,
unlike "personal" vehicles. The front end styling, with its
round headlamps and horizontal grill bars, certainly recalls
Chevrolet's trucks of the late 1940's and early 1950's, but
it's not a truck.
What is it? A whole lot of fun. Based on the compact
SUV chassis, the similarity with SUVs stops there. Under
* REPEAT SEVERAL TIMES * OPTIONAL PARTS
* A REPETER PLUSIEURS FOIS * PIECES EN OPTION
READ THIS BEFORE YOU BEGIN
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (★) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before
cementing in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas
to be cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up and
slide backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with
setting solutions or solvents.
If you have any questions or comments, call our hotline at:
Revell-Monogram Consumer Service Department, 725 Landwehr Road, Northbrook, Illinois 60062
Be sure to include the plan number (85769100200), part number, description, your return address and phone number.
KIT 7691
Chevy SSR
SSR
® ™
* DECAL * ALTERNATIVE ASSEMBLY
* DECAL COMANIE * ENSEMBLAGE ALTERNATIVE
LIRE CE QUI SUIT AVANT DE COMMENCER
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (★) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente
peu concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant
de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son support
en papier.
5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQUE: Les autocollants sont compatibles avec
les solutions de fixage ou les solvants.
or, please write to:
Visit our website: www.revell-monogram.com
REVELL-MONOGRAM, LLC Northbrook, IL. Copyright © 2003. All rights reserved.
®
the hood you'll find an all-aluminum 5.3 liter V8 engine
matched to a four speed automatic, providing an exhaust
. note that'll put a smile on your face. Developing 300 horse-
power, the Generation III motor propels the SSR to 60 mph
in just seven seconds. Huge wheels and tires-19" in the
front, 20" in back-fill the wheel wells and add to the aggres-
sive look.
But the most fun is the roof. All steel in construction and
hinged in the middle, pressing one button starts the motors
that folds the top up and places it in the rear compartment,
the cover of which by now has lifted up by way of its own
hinges and electric motors. It couldn't be cooler and the
whole process takes only twenty seconds.
As John Cleese of the Monty Python comedy troupe
would say, "...and now for something completely different".
We think that's exactly what Chevy
* CEMENT TOGETHER
* A COLLER
™
had in mind.
®
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
This optional paint guide is provided if you
choose to detail paint your model.
Ce guide de peintures vous sera fourni si vous choisissez de
peindre votre modèle en détail.
Aluminum
Aluminium
Flat Black
Noir mat
Gloss Red
Rouge lustré
Semigloss Black
Noir satiné
Steel
Acier
Transparent Red
Rouge transparent
Transparent Orange
Orange transparent
(800) 833-3570
85769100200
* DO NOT CEMENT
* NE PAS COLLER