GE JB700SN Dimensions And Installation Information

JB700SN
GE 30" Free-Standing Electric Range
®
Dimensions and Installation Information (in inches)
KW Rating
240V
12.0
208V 9.0
Breaker Size
40 Amps
†
Note: Check local codes for required breaker size.
†
Effective January 1, 1996, the National Electrical Code requires
that new construction (not existing) utilize a 4-conductor
connection to an electric range.
Receptacle Locations: Locally approved flexible service cord
or conduit must be used because terminals are not accessible
after range installation. See shaded area in drawing for location
of electrical outlet box. Recommended outlet locations allow
range to be installed directly against wall.
Note: 30" ranges conform to U.L. requirements for 0" spacing
from adjacent walls below countertops. To reduce possibility
of scorching walls, engineering recommends a minimum of
1-1/2" spacing to allow for possible extended, high-heat,
no-load heating element operation.
Installation information: Before installing, consult installation
instructions packed with product for current dimensional data.
For answers to your Monogram, GE Profile
®
GE ® appliance questions, visit our website at
ge.com or call GE Answer Center
®
800.626.2000.
or
™
service,
30_install_fse_ge.eps
30_install_fse_ge.eps
Acceptable electrical
outlet area
2-1/2
Acceptable electrical
outlet area
29-7/8
29-7/8
46-7/8
25-3/8
47-5/8
Specification Created 6/08
30
2-1/2
25
2-1/2
30
25
2-1/2
46-7/8
Dimension from wall to front of
closed oven door handle is 27-3/4
7-1/2
25-3/8
47-5/8
Dimension from wall to front of
closed oven door handle is 27-3/4.
All GE ranges are equipped with
Listed by
an Anti-Tip device. The installation
Underwriters
of this device is an important,
required step in the installation Laboratories
of the range.
321524
7-1/2