Hook-Up Information - Mr. Heater MH11Q Operating Instructions And Owner's Manual

HOOK-UP INFORMATION

1
. Heater model MH11Q is packaged completely
assembled. Propane cylinders are not included with
model MH1 1Q.
2. Remove heater from carton.
3. Hold heater in one hand and with the other hand hold
propane cylinder vertically and carefully turn clockwise
into heater valve until snug. (Careful not to cross-
thread) – Figure 1.
4. Use only LP-gas cylinders constructed for use with
propane only (HD-5) and marked in accordance with
the specifications for LP-gas cylinders of the U.S.
Department of Transportation (DOT Spec. 39).
5. Use propane fuel cylinders of not more than 75 cubic
inches (2-1/2 pounds nominal water capacity) and
connect to cylinder valve outlet connection No. 600 as
specified in the Compressed Gas Associations Limited
Standard Cylinder Valve Outlet Connection for
propane-small valve series.
ENERCO GROUP, INC. | Gas-Fired Infra-Red Portable Heater
WARNING
• Never touch heater while in operation to
avoid injury. Move heater by grasping
the propane cylinder carefully.
• Read pages 3 and 4 before
lighting heater.
WARNING
• STOP-LOOK-READ-UNDERSTAND these
warning instructions to avoid serious
injury, fire, asphyxiation or death.
• DO NOT LEAVE HEATER UNATTENDED OR
IN OPERATION WHILE SLEEPING.
• NOTE: DO NOT USE MATCHES FOR LEAK
TESTING. USE ONLY SOAP SOLUTION.
3
Operating Instructions and Owner's Manual