Section 3 − Specifications; Description; Included With Your Unit - Miller Electric MTG Plus Tungsten Grinder Owner's Manual

3-1. Description

The MTG Plus cuts, grinds, and planes tungsten electrodes used in the TIG (GTAW) welding process. Additional fea-
tures and benefits of this unit are:
•
Electrodes are sharpened to conform to recognized standards.
•
The replaceable grinding wheel is diamond-coated on both sides.
•
The grinding wheel has an offset edge for easy cutting − an industry exclusive!
•
The head assembly allows for different electrode angles and diameters.
•
The unit can be hand operated, or wall or table-mounted using the supplied mounting bracket.
Y Grinding the tungsten electrode produces dust and flying sparks which can cause injury and start fires. Use local exhaust (forced ven-
tilation) at the grinder or wear an approved respirator.
Read MSDS for safety information. Consider using tungsten containing ceria, lanthana, or yttria instead of thoria. Grinding dust from
thoriated electrodes contains low-level radioactive material. Properly dispose of grinder dust in an environmentally safe way. Wear
proper face, hand, and body protection. Keep flammables away.

3-2. Included With Your Unit

2
OM-230 915 Page 4
SECTION 3 − SPECIFICATIONS
1
3
1 MTG Plus Tungsten Grinder
With Diamond Grinding Wheel
2 Steel Carrying Case
3 Electrode Holder With
Clamping Collet
4 Torx Screwdriver
5 Mounting Bracket
4
5
804 716 / Ref 804 762