American DJ Warp 250 User Instructions
American DJ Warp 250 User Instructions

American DJ Warp 250 User Instructions

American dj user instructions warp 250

Advertisement

Quick Links

User Instructions
ADVANCED
DRIVE SERIES
07/03
American DJ
®
4295 Charter Street
Los Angeles, CA. 90058
www.americandj.com
Warp 250™
Unpacking: Thank you for purchasing the Warp 250™ by American
DJ
. Every Warp 250™ has been thoroughly tested and has been
®
shipped in perfect operating condition. Carefully check the shipping
carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your fixture for any
damage and be sure all accessories necessary to operate the unit
have arrived intact. In the event damage has been found or parts are
missing, please contact our toll free customer support number for fur-
ther instructions. Please, do not return this unit to your dealer without
first contacting customer support.
Introduction: The Warp 250™ uses 11 color/gobo combinations to
create a colorful hightech moonflower effect, that changes to the beat
of music. This unit is part of the Advanced Drive Series (ADS). Any unit
that has the ADS logo is designed to interconnect and work together.
When several ADS effects are linked together they can form an inex-
pensive system that creates an intelligent look. This unit is best used in
multiples of four or more. For best results mix and match several ADS
units together with a fog or haze machine to enhance the beam output.
An optional MINI/C controller may be purchased separately and will
control a blackout function.
Warning! The 1/4" jack on the unit is for the optional MINI/C. Do not
attempt to connect an audio signal to this jack, this will damage the
PC board and void your manufactures warranty!
Customer Support: American DJ
port line, to provide set up help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5:
00 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2610
E-mail:
support@americandj.com
To purchase parts online visit http://parts.americandj.com
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact American DJ
customer support.
®
American DJ
www.americandj.com Warp 250™ Instruction Manual Page 2
©
®
Introduction
provides a toll free customer sup-
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Warp 250 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for American DJ Warp 250

  • Page 1 07/03 Warp 250™ Unpacking: Thank you for purchasing the Warp 250™ by American . Every Warp 250™ has been thoroughly tested and has been ® shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the...
  • Page 2: Table Of Contents

    • 10 Colors Plus White Warp 250™ The Warp 250™ carries a one year (365 days) limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) num-...
  • Page 3: Operating Modes

    Before plugging your unit in, be sure the source voltage in your area matches the required voltage for your American Warp 250.™ Because line voltage may vary from venue to venue, ® you should be sure your unit voltage matches the wall outlet voltage before attempting to operate you fixture.
  • Page 4: Set-Up

    DMX terminal, (Resistance 120 Ohm 1/4 W) between PIN 2 (DMX-) and PIN 3 (DMX +) of the last fixture. American DJ - www.americandj.com - Warp 250™ Instruction Manual Page 7 © ® Set Up Warp 250™...
  • Page 5: Trouble Shooting

    4. Clean the internal lens with glass cleaner and a soft cloth every 30-60 days. 5. Always be sure to dry all parts completely before plugging the unit back in. American DJ - www.americandj.com - Warp 250™ Instruction Manual Page 9 © ® Trouble Shooting Warp 250™...
  • Page 6: Warranty

    Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice. American DJ - www.americandj.com - Warp 250™ Instruction Manual Page 11 © ® American DJ® World Headquarters:...

Table of Contents