Hasbro G.I. Joe Ripattack Tiger Snake with Street-Viper Instructions

ASSEMBLY:
Attach gun to vehicle
as shown.
2
Insert the ripcord into the
launcher with the teeth facing
up. Quickly pull the ripcord
out of the launcher to
rev the vehicle.
Insert
ripcord
here.
Some poses may require hand support. Product and colors may vary.
© 2009 Paramount Pictures Corporation. All rights reserved.
®* and/or™* & © 2009 Hasbro.
All Rights Reserved.TM & ® denote U.S. Trademarks.
*
®
™*
™*
Load the rear axle of the
1
vehicle onto the launcher until
the vehicle hooks into place.
Place the vehicle/launcher on a flat surface.
Position it in the direction you want the
vehicle to move. Pull the trigger on the
launcher to release the vehicle.
Visit GIJOE.COM
*
TIGER SNAKE
STREET-VIPER
*
3
NOTE: You are not able to launch the vehicle until
the launcher is resting on a flat surface.
Trigger
P/N 6992240000
AGES 4 +
93814/90312 Asst.
with
*
™
*
™