GE JB905 Owner's Manual page 10

Using the surface units—Knob-controlled models.
Be sure you turn the control knob to
OFF when you finish cooking.
10
How to Set
Push the knob in and turn in either
direction to the setting you want.
At both OFF and HI the control
clicks into position. You may hear
slight clicking sounds during cooking,
indicating the control is keeping the
power level you set.
A HOT SURFACE indicator light, on the
cooktop, will glow when any radiant
element is turned on. It will remain
on until the surface is cooled to
approximately 150°F.
Using the Bridge Burner
To use the bridge burner, turn the
left front control knob to the BRIDGE
BURNER settings.
For full bridge surface unit operation,
also turn on the left rear surface unit.
To use only the front surface unit, turn
the control knob to the FRONT BURNER
settings.
Dual Surface Unit Control Knob
The right front surface unit has 2 cooking sizes
to select from so you can match the size of the
unit to the size of the cookware you are using.
To use the small (6") surface unit, turn
the control knob to the SMALL BURNER
settings.
To use the large (9") surface unit, turn
the control knob to the LARGE BURNER
settings.
Hot surface indicator light will:
s
come on when the unit is hot to the touch.
s
stay on even after the unit is turned off.
s
glow until the unit is cooled to approximately
150°F.
(on some models)
(on some models)