Chapter 2. Important Service Information; Strategy For Replacing Frus - Lenovo ThinkPad S440 Hardware Maintenance Manual

Hide thumbs Also See for ThinkPad S440:
Table of Contents

Advertisement

Chapter 2. Important service information

This chapter presents following important service information that applies to all machine types supported by
this manual:
"Strategy for replacing FRUs" on page 21
"Strategy for replacing a hard disk drive" on page 22
"Important notice for replacing a system board" on page 22
"How to use error message" on page 22
"Strategy for replacing FRUs for CTO, CMV, and GAV" on page 22
"Product definition" on page 22
"FRU identification" on page 23
Important:
• If the computer is equipped with both a hard disk drive and an M.2 solid-state drive, do not use the M.2
solid-state drive as a bootable device. The M.2 solid-state drive is designed and developed for "cache"
function purpose only.
• Advise customers to contact the Lenovo Customer Support Center if they need any assistance in
obtaining or installing any software fixes, drivers, and UEFI BIOS downloads. Telephone numbers for
Lenovo Support are available at:
http://www.lenovo.com/support/phone
• System Disassembly/Reassembly videos that show the FRU removals or replacements
®
for the Lenovo
authorized service technicians are available in the following support site:
http://www.lenovoservicetraining.com/ion/

Strategy for replacing FRUs

Before replacing parts:
Ensure that all software fixes, drivers, and UEFI BIOS downloads are installed before replacing any FRUs
listed in this manual.
After a system board is replaced, ensure that the latest UEFI BIOS is loaded to the system board before
completing the service action.
To download software fixes, drivers, and UEFI BIOS, do as follows:
1. Go to http://www.lenovo.com/support.
2. Enter the product number of the computer or press the Run Auto-Detect button on the screen.
3. Select Drivers & Software.
4. Follow the directions on the screen and install the necessary software.
Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs:
• If you are instructed to replace a FRU but the replacement does not correct the problem, reinstall
the original FRU before you continue.
• Some computers have both a processor board and a system board. If you are instructed to replace either
the processor board or the system board, and replacing one of them does not correct the problem,
reinstall that board, and then replace the other one.
© Copyright Lenovo 2013
21

Advertisement

Table of Contents
loading

Table of Contents