Minute/Second Timer; Delayed Cooking; Minute Pad; Hold Time - GE Spacemaker II JEM31M Use And Care & Cooking Manual

HOW TO USE THE M~UTE/SECO~ TMER
The Minute/Second Timer
The Minute/Second Timer has three timing
functions:
It operates as a minute timer.
It can be set to delay cooking.
It can be used as a hold setting after defrosting.
The Minute/Second Timer operates without
microwave energy.
How to Time a 3-Minute Phone Call
Step 1: Touch MIN/SEC TIMER pad.
Step 2: Touch 3 and MINUTE pad (for 3 minutes and
no seconds).
Step 3: Touch START. Display shows time counting
down. The timer signals when time is up.
to Defrost, Hold and Time Cook
How
Let's say you want to defrost a frozen casserole for
15 minutes, hold for 10 minutes and then Time Cook
for 25 minutes. Here's how to do it:
Step 1:
Take casserole from freezer and place in oven.
Step 2: Touch TIME
m
Step 3: Touch pads 1,5 and
MINUTE pad for 15 minutes
defrosting time. (Defrosting is
automatically set on power level
3 but can be changed by touching
the POWER LEVEL pad and the
desired power level.)
10
Using a Holding Time
The Minute/Second Timer can also be used to
program a "holding time" between microwave
cooking functions. The time can range from one
second to 99 minutes and 99 seconds. A holding
or standing time may be found in some of your
own recip~s or in a ~ookbook.
Programming Delayed Cooking
To delay cooking up to 99 minutes and 99 seconds,
touch either TIME COOK I & II, TEMP COOK &
HOLD or AUTO ROAST and enter cook time,
temperature or code. Touch MIN/SEC TIMER and
enter number of minutes to delay cooking.
delaying Temp Cook & Hold or Auto Roast
cooking, be sure probe is in food.
Timer will count down to zero and cooking will begin.
Step 4: Set standing or hold time
by touching MIN/SEC TIMER
Step 5: Touch 1,0 and MINUTE pad to hold for
ten minutes.
Step 6: Touch TIME
TIME COOK
COOK I &II pad.
I &II
Step 7: Touch 2,5 and MINUTE pad for 25 minutes
of cooking time.
Step 8: Touch START. As
each function is automatically
START
performed, oven display shows
instructions entered and the
function. When time is up, the
oven signals and flashes "End."
When
Touch START.