GE Spacemaker II JEM31F Use And Care Manual page 10

AUTO ROAST uses the
temperature probe to cook to the
desired serving temperature.
Unlike TEMP COOK/HOLD,
which uses a single power level,
AUTO ROAST uses up to 3 power
settings which automatically
switch during roasting, thus
providing even, tender cooking
results without overcooking.
Just as in conventional roasting.
onl!. tender roasts should be Auto
Roasted until specified internal
tcmpcratures are reached. Less
tcnder roasts should be microwaved
by time, according to the Cookbook
nehich comcs with your oven.
Complete information on preparing
roasts for microwaving is in your
Cookhook.
Place tender beef roast on trivet in
microwave safe dish. Insert probe
horizontally into the center meaty
area not touching bone or fat. Make
sure the handle does not touch the
food or top or sides of the oven.
Cover with wax paper.
Pork or ham roasts need no trivet.
Add 1/2 cup water to roast dish and
cover with plastic wrap.
Place meat in oven with probe to
the right. Insert cable end of probe
firmly into receptacle on oven wall.
How
to
Auto Roast
Reef
to
Medium
1. Touch AUTO ROAST pad.
"AUTO" and "TEMP" are displayed
and "ENTER CODE' flashes. Touch
number pad 2. "TEMP:' "CODE"
and "2" appear on display and
"START" flashes. Touch START.
Display shows "COOL" and "2"
until food temperature reaches 80°F.
2. At SOOF., display switches to
show meat's internal temperature.
3.
When you select Auto Roast
Codes 1.2.3 or4, the oven signals
with 4 beeps and "Turn" flashing
on the display when it's time to turn
the roast over. After you turn the
roast, close the door and touch
START. The remaining cooking
time counts down on the display.
(Note: Oven continues to cook after
the signal whether or not roast is
--.
turned over.)
\ v
4. After a pre-programmed food
temperature is reached, oven beeps
4 times and
"End
"
appears on the
display.
10