Adapter Plugs - GE JEM31 Owner's Manual

49-40356-1v01 5/11/04 3:59 PM Page 9

ADAPTER PLUGS

Usage situations where appliance's power cord will be disconnected
infrequently.
Because of potential safety
hazards under certain conditions,
we strongly recommend against
the use of an adapter plug. However,
if you still elect to use an adapter,
where local codes permit,
a TEMPORARY CONNECTION may
be made to a properly grounded
2-prong wall receptacle by the use
of a UL-listed adapter which is
available at most local hardware stores.
The larger slot in the adapter must be aligned with the larger slot
in the wall receptacle to provide proper polarity in the connection
of the power cord.
CAUTION: Attaching the adapter ground terminal to the wall receptacle
cover screw does not ground the appliance unless the cover screw is
metal, and not insulated, and the wall receptacle is grounded through
the house wiring.
You should have the circuit checked by a qualified electrician to
make sure the receptacle is properly grounded.
When disconnecting the power cord from the adapter, always hold
the adapter with one hand. If this is not done, the adapter ground
terminal is very likely to break with repeated use. Should this
happen, DO NOT USE the appliance until a proper ground has
again been established.
Usage situations where appliance's power cord will be disconnected
frequently.
Do not use an adapter plug in these situations because frequent
disconnection of the power cord places undue strain on the
adapter and leads to eventual failure of the adapter ground
terminal. You should have the 2-prong wall receptacle replaced
with a 3-prong (grounding) receptacle by a qualified electrician
before using the appliance.
GEAppliances.com
(Adapter plugs not
permitted in Canada)
Align large
prongs/slots
Ensure proper ground
and firm connection
TEMPORARY
before use.
METHOD
9