Advertisement
EAR OF CORN FEED TOY
Chirpy-Chi loves to be cared for, and loves to eat his Ear of Corn Feed Toy.
Chirpy-Chi reacts to his corn toy when you wave it on top of his beak. He will
respond with happy eyes and a feeding motion.
- Corn Feed Toy does not require batteries.
- Do not attempt to open corn toy.
- Avoid placing the corn toy close to any magnetic-
sensitive objects like cassette tapes, credit cards,
videotapes, etc.
Warning: Corn feed toy is a toy, not intended for
use by a live bird.
LISTEN TO A SONG
To listen to one of Chirpy-Chi's favorite songs, please follow the sequence
below:
1. Wait until Chirpy-Chi stops moving.
2. Hold your hand completely over
Chirpy-Chi's eyes and beak.
3. While still holding your hand over eyes
and beak, press hair on top of his head
5 times quickly (press 5 times within 2
seconds).
4. Wait until you hear 3 beeps, then press
hair on Chirpy-Chi's head from 1 – 8 times
and you will hear a different song for each
number of beeps.
5. After each song is completed, Chirpy-Chi
will return to his normal mode. To hear
another song, repeat steps 1-4.
SLEEPING
Because Chirpy-Chi starts as a baby bird, he needs his sleep. Chirpy-Chi will
fall asleep when it is dark or when no one is playing with him. When he gets
tired, Chirpy-Chi might imitate other animal sounds to get your attention, or
even flap his wings and make angry eyes. After about 6 minutes, if he does
not get anyone to play with him, Chirpy-Chi will then fall into a deep sleep.
To wake up Chirpy-Chi when he is in a deep sleep, press the hair on his head.
If Chirpy-Chi was sad when he fell asleep, it might take slightly longer for him
to completely wake up, so you might need to touch his head more than once.
If Chirpy-Chi was happy when he fell asleep, he should wake up quickly.
COMMUNICATING WITH OTHER CHIRPY-CHI'S AND
ROBO-CHI™ PETS
Chirpy-Chi loves to communicate with other Chirpy-Chi's and other Robo-Chi
Pets! To begin communication, please follow the sequence below:
1. Place the two Robo-Chi Pets facing each other approximately 6" – 12" apart.
2. Wait for both to stop moving.
3. Press the touch sensors ONCE on BOTH PETS at the SAME TIME.
4. Each should start speaking, if they are happy at the same time, they will sing
a song together. If they are unhappy with each other, they might speak
unhappily with each other and could even refuse to sing!
5. Chirpy-Chi and other Robo-Chi Pets will automatically return to normal play
mode after communicating for approximately 3 minutes.
6. If you want them to communicate again, please repeat steps 1-3.
CHIRPY-CHI REASSEMBLY
Chirpy-Chi's wings, tail and legs are designed to be re-attached if they become
detached. To reassemble, simply align notches of unattached piece with
appropriate hinge, as shown below.
Hinge
RESET
Press reset button only if Chirpy-Chi's movements seem erratic or if he seems
to be malfunctioning.
To reset Chirpy-Chi, use a ball point pen or thin
straight object (like a straightened paper clip) to
press reset button located on the right side of
Chirpy-Chi.
CLEANING INSTRUCTIONS
TROUBLESHOOTING
Chirpy-Chi is designed to provide hours of fun play. If Chirpy-Chi becomes
erratic and you are having trouble, check to make certain that Chirpy-Chi has
fresh batteries and then call Tiger Electronics' Customer Service Department
at 1-800-844-3733.
If you can't see Chirpy-Chi's eyes, he may be asleep (see section titled
"SLEEPING") or check to make certain there are fresh batteries.
You can wake up Chirpy-Chi by pressing the head sensor. If Chirpy-Chi was
sad when he fell asleep, it may take multiple presses to wake up Chirpy-Chi.
If Chirpy-Chi was happy when he fell asleep, it will be easier to wake him up.
To wake up Chirpy-Chi when he is snoring, hold his corn feed toy in front of
his mouth or press his touch sensor.
For more information about Tiger Electronics, our products and special
promotions, please visit our web site at: www.tigertoys.com.
90-DAY LIMITED WARRANTY
Tiger Electronics,Ltd. (TIGER) warrants to the original consumer purchaser of this
product that the product will be free from defects in materials or workmanship for 90
days from the date of original purchase. This warranty does not cover damages
resulting from accident, negligence, improper service or use or other causes not
arising out of defects in materials or workmanship.
During this 90-day warranty period, the product will either be repaired or replaced
(at TIGER'S option) without charge to the purchaser, when returned with proof of
the date of purchase to either the dealer or to TIGER.
Product returned to TIGER without proof of the date of purchase or after the 90-day
warranty period has expired, but prior to one year from the original date of purchase,
will be repaired or replaced (at TIGER'S option) for a service fee of US$17.00.
Payments must be by check or money order payable to Tiger Electronics, Ltd.
THE FOREGOING STATES THE PURCHASER'S SOLE AND EXCLUSIVE REMEDY
FOR ANY BREACH OF WARRANTY WITH RESPECT TO THE PRODUCT.
All product returned must be shipped prepaid and insured for loss or damage to:
TIGER REPAIR DEPARTMENT
1000 N. Butterfield Road, Unit 1023
Vernon Hills, IL 60061, U.S.A.
The product should be carefully packed in the original box or other packing materials
sufficient to avoid damage during shipment. Include a complete written description
of the defect, a check if product is beyond the 90-day warranty period, and your
printed name, address and telephone number.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES AND NO OTHER
REPRESENTATIONS OR CLAIMS OF ANY NATURE SHALL BE BINDING ON OR
OBLIGATE TIGER IN ANY WAY. ANY IMPLIED WARRANTIES APPLICABLE TO
THIS PRODUCT, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE NINETY (90) DAY PERIOD
DESCRIBED ABOVE. IN NO EVENT WILL TIGER BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM POSSESSION,
USE, OR MALFUNCTION OF THIS TIGER PRODUCT.
Some states do not allow limitations as to how long an implied warranty lasts and/or
exclusions or limitations of incidental or consequential damages, so the above
limitations and/or exclusions of liability may not apply to you. This warranty gives
you specific rights, and you may also have other rights which vary from state to state.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions :
(1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
Notches
equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio TV technician for help.
RESET
BUTTON
®, TM, & © 2001 Tiger Electronics, Ltd. All Rights Reserved.
980 Woodlands Parkway, Vernon Hills, Illinois 60061, U.S.A.
®, TM, & © 2001 Tiger Electronics UK Ltd. All Rights Reserved.
Belvedere House, Victoria Avenue, Harrogate, North Yorkshire, United Kingdom HG1 1EL.
© SEGA TOYS 2001
PRINTED IN CHINA
High temperature will
destroy the unit.
Do not leave unit in direct
sunlight.
Clean only with a piece of
soft dry cloth.
200002160IWTI-01
Advertisement
