Download Print this page

Linkskey LKR-604 Quick Installation Manual

4 port broadband router

Hide thumbs Also See for LKR-604:

See also: User Manual , Quick Installation Manual

Table of Contents

Need help?

Do you have a question about the LKR-604 and is the answer not in the manual?

Page 2: Before You Start
1. A computer with wired network adapter properly installed. 2. Broadband Internet connection 3. Installed Cable or DSL Modem 4. Web Browser：Internet Explorer 6.0 or higher Package Contents 1. LKR-604 2. CD-ROM(User Manual) 3. Quick Installation Guide 4. Power Adapter 5. RJ45 Ethernet Cable...
Page 3: Hardware Installation
LKR-604 Rev.C Hardware Installation 1. Power off the router and DSL/Cable modem. 2. Connect one end of the Ethernet cable to the LAN port on the router. Connect the other end of the Ethernet cable to the Ethernet port on the computer.
Page 4 LKR-604 Rev.C 4. Power on DSL/Cable modem firstly, wait for a minute until the modem is ready then power on the router. 5. Check the LEDs: a) Once power on the router, Power LED should be on. b) LAN LED should be on for each active LAN connection.
Page 5: Configure The Router
LKR-604 Rev.C Configure the Router Open your web browser, type http://192.168.0.1 in the Address box, and press Enter Enter default User Name and Password；admin/admin and then click OK...
Page 6 LKR-604 Rev.C Click Quick Setup Select Time Zone and then click Next...
Page 7 LKR-604 Rev.C Click on the proper Internet Connection type. Configure the settings based on information provided by your ISP. Follow the wizard instructions to complete the configuration. Enter Primary DNS address and Secondary DNS address. Then click Finish. The setting is finished and then click Continue.