Jue Ying RM-4D User Manual

User Manual for Long Range Universal Camera Remote Control
Model: RM-4D
This Long Range Universal Camera Remote Control RM-4D can be used to control more than 50 models of camera, 100%
compatible with the original Remote Control and with longer operate range.
♦

Camera compatible table

Pentax
K10D
*ist D
Samsung
GX-1S
Nikon
D80
CoolPix8400
Canon EOS400D
DSLR/SLR
EOS10
Olympus E400
C8080
♦

Camera setup for remote control photography

Pentax & Samsung DSLR Camera
1. Mount the camera on tripod and place it on a flat ground.
2. Select the LCD menu until the display as below
3. Point the remote control towards the front of the camera.
4. Press the shutter-release button on the Pentax block.

Nikon Camera

1. Mount the camera on tripod and place it on a flat ground.
2. Press the
remote) is displayed on the control panel.
3. Frame the photograph and aim the transmitter on the RM-4D at the infrared receiver on the camera.
4. Press the shutter-release button on the Nikon block
Canon Camera
1. Mount the camera on tripod and place it on a flat ground.
K100D K110D
Optio S6/S60 Optio
S5z/S5n/S5i
GX-1L
D40 D50
CoolPix8800 Nuvis S
EOS350D EOS300D
EOS300V EOS300X
E330 E500
C7070 Stylus 800
button on the camera and rotate the main command dial until
*ist DS2 *ist DS
Optio S4i/S4 Optio
SV/SVi
D70s D70
LiteTouch
EOS30/33/30V EOS50/55
3000VQD EOSIX
E300 E1
Stylus 500 C5050
*ist DL2 *ist DL
Optio 550/555 Optio 750z
F75 F65
EOSKissIII EOS100
IXUS Jr/II/III SURESHOT
E20 E10
C770 C750
(delay remote) or (quick response