Caution! There are no user serviceable parts inside this mixer. do not attempt any repairs yourself, without being instructed to do so by an authorized American Audio service technician. doing so will void your manufactures warranty. In the unlikely event your mixer may require service, please contact American Audio customer support.
Page 8
21. EFF/AUX SEND JACK - Use this 1/4” jack to accept a external effects processor. Use the EFF/AUX knob to control the output level. 22. SPEAKEr OUTPUTS - These are the powered speaker outputs designed for each of the PPA-210 speakers. Use the included cables to connect the speakers to the outputs.
Page 9
25. rIGHT CHANNEL SEND/rETUrN JACK - This jack is used to patch in an equalizer, or other processor into the PPA-210. The other end of the jack should be connected output of the external device. 26. LEFT CHANNEL SEND/rETUrN JACK - This jack is used to patch in an equalizer, or other processor into the PPA-210.
Page 11
OPEN/CLOSE ThE SYSTEM To open and close your PPA-210 system, follow the instructions below. Caution: Be very careful that you do not pinch your fingers when closing your PPA-210 system! 1. To seperate the speakers from the console, locate the latches at the top and press the latches in.
Page 14
PPA-210 MOUNTiNG Pole Mounting – The PPA-210 also include a pole mount option. The pole mount socket located on the bottom of the speaker may be used to secure the speaker to a speaker tri-pod, such as the American Audio SPS-1b or the SPS-2b.
PPA-210 WARRANTY The PPA-210 carries a one year limited warranty. We recommend you fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a R.A. (return authorization) number. If the mixer is under warranty, you must provide a proof of purchase invoice.