Canon VIXIA HF R42 Insrtruction Manual page 137

>
• If you have already performed this procedure before, the connection
will be established automatically. Skip to step 4.
2 Camcorder: When [Save the access point] appears on the screen,
touch [OK].
3 Camcorder: Perform the connection in
Access Point
• [Connected] will appear on the camcorder's screen and the
connection will be established.
• After the connection is established, you can touch [View Information]
to view the access point's SSID, connection protocol, and the
camcorder's IP address and MAC address.
4 Computer: Select your camcorder's model number from the list.
5 Computer: Select the folder for the camcorder's built-in memory
or memory card and play back the movies and photos.
6 Camcorder: Touch [End] when finished.
IMPORTANT
• Do not open the memory card slot cover during the wireless connec-
tion.
NOTES
• Depending on the wireless router's settings and capability, playback
may take time to start or may not appear smooth. For details, refer to
Troubleshooting
Wi-Fi Connection Using an Access Point
The camcorder can connect to a Wi-Fi network using a wireless router
(access point) and even remember the settings for the 4 most recently
used access points. When this is exceeded, the oldest setting will be
replaced.
>
[ Wi-Fi]
(A 137).
(A 163).
[ Media Server]
Wi-Fi Connection Using an
>
[OK]
Wi-Fi Functions
137