Table of Contents
Advertisement
System requirements
Before installing the ASUS USB Wireless LAN Adapter, make sure that your system
meets the following requirements:
®
®
•
Intel
Pentium
4 or AMD K7/K8 system
•
Minimum 64MB system memory
®
•
Windows
98SE/ME/2000/XP operating system
•
Optical drive (for software installation)
•
An available USB port (USB 2.0 recommended because USB 1.1 cannot achieve
maximum wireless performance)
Installation procedures
Follow these instructions to install the ASUS USB Wireless LAN Adapter on your
computer.
1. Install the device drivers and utilities from the support CD.
2. Connect the device to your computer.
NOTE: You must install the ASUS USB Wireless LAN Adapter drivers and
utilities before connecting the device to your computer.
Installing drivers and utilities
To install the device driver and
utilities on your computer:
1. Insert the support CD to the
optical drive.
2. Click "Install ASUS WLAN
Utilities/Driver" when the
ASUS
Wireless
installation window appears.
3. The device drivers and utilities
are copied on your computer.
NOTE: If Autorun is NOT enabled in your computer, browse the contents
of the support CD and double click the Setup.exe file to run the CD.
ASUS USB Wireless LAN Adapter
Chapter 2 - Installation
LAN
11
Advertisement
Table of Contents
