Charge The Battery - Samsung Anycall User Manual

Notes A Universal Subscriber Identity Module (USIM) card is required to access advanced
wireless networks and services, such as WCDMA, WiBro, or World Phone. The USIM
subscriber is responsible for all call charges and services fees incurred while using
network services.
When you turn the phone on after first installing a USIM card, the phone will take about
1 minute to scan information stored on the card. During this time, you can make or
receive calls but you cannot access phone numbers or other data stored on the card.
This is not a malfunction of the USIM card and normal operation will resume soon.
When you insert a third party USIM card into the phone, you can use voice calling,
video calling, and text message functions, but cannot access some functions, including
wireless internet and multimedia messaging. For more details, contact SK Telecom.

Charge the battery

With a battery charger
If your phone includes a standard battery charger or a charging adapter and standard battery
charger,
If necessary, connect the charging adapter to your phone.
1
Connect the small end of the supplied standard charger to the phone or charging adapter
2
and the large end to a power outlet.
When the battery is fully charged (the light on the charger is green), unplug the charger
3
and remove the charging adapter (if necessary).
With a battery holder
If your phone includes a battery holder and charger,
Remove the battery from your phone.
1
Insert the battery into the battery holder. Ensure that the battery is inserted according to
2
the diagram on the battery holder.
Connect the small end of the supplied standard charger to the battery holder and the
3
large end to a power outlet.
When the battery is fully charged (the light on the charger is green), unplug the charger
4
and remove the battery from the battery holder.
0
Anycall English User's Guide
for SK Telecom subscribers