Table of Contents
Advertisement
Problem
I want to use an external hard drive,
secondary hard drive, or optional
expansion base hard drive to store my
TV programs.
I hear no sound, or the volume is too
low.
Solution
Follow these steps:
1.
Be sure that your external hard drive is connected to your computer or
optional expansion base. If using an optional expansion base, be sure that it
is connected to the computer.
2.
Open Windows Media Center on your computer by clicking Start, and then
clicking Windows Media Center.
3.
Select Hard Drive.
Then perform one of the following procedures:
1.
Press the start button on the remote control.
2.
Click Tasks, click Settings, click TV Recorder, and then click Recorder
Storage.
3.
Under Record on drive, select the hard drive where you want to store your
recordings.
4.
Click Save.
– or –
1.
Press the media button on the computer to open either MediaSmart or
QuickPlay.
2.
Click the TV icon from the menu.
3.
Click the i icon from the menu on the left.
4.
Under Recording Destination, select the hard drive where you want to store
your recordings.
All future TV recordings will now be saved to the new hard drive location.
The Windows Media Player and Windows may share certain audio device control
settings. If volume performance does not meet your expectations, check the
following settings:
●
Open Windows Media Player and be sure that the volume settings are not
muted or turned down too low.
●
Be sure that the Windows system volume control settings are not muted or
turned down too low:
◦
Double-click the volume control icon in the Windows notification area, at
the right of the taskbar.
– or –
◦
Click Start, click Control Panel, and then click Sound.
35
Advertisement
Table of Contents
