Adjusting The Engine Idling Speed; Adjusting The Throttle Cable Free Play - Yamaha TT-R50E Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Adjusting the engine idling
speed
The engine idling speed must be
checked and, if necessary, adjusted as
follows at the intervals specified in the
periodic maintenance and lubrication
chart.
NOTE:
A diagnostic tachometer is needed to
make this adjustment.
1. Attach the tachometer to the spark
plug lead.
2. Start the engine and warm it up for
6
several minutes at 1000–2000
r/min while occasionally revving it
to 4000–5000 r/min.
NOTE:
The engine is warm when it quickly re-
sponds to the throttle.
3. Check the engine idling speed
and, if necessary, adjust it to spec-
ification by turning the throttle stop
screw. To increase the engine
idling speed, turn the screw in di-
EAU21360 rection (a). To decrease the en-
gine idling speed, turn the screw in
direction (b).
(b)
1
1. Throttle stop screw
Engine idling speed:
1600–1800 r/min
NOTE:
If the specified idling speed cannot be
obtained as described above, have a
Yamaha dealer make the adjustment.
6-11
Adjusting the throttle cable
free play
(a)
1. Throttle cable free play
The throttle cable free play should mea-
sure 3.0–5.0 mm (0.12–0.20 in) at the
throttle grip. Periodically check the
throttle cable free play and, if neces-
sary, adjust it as follows.
NOTE:
The engine idling speed must be cor-
rectly adjusted before checking and ad-
justing the throttle cable free play.
1. Loosen the locknut.
EAU21370