Disposal; Troubleshooting - Agilent Technologies 729-0800 User Manual

Disposal

Meaning of the "WEEE" logo found in labels.
The following symbol is applied in accordance with the EC WEEE
(Waste Electrical and Electronic Equipment) Directive.
This symbol (valid only in countries of the European Community)
indicates that the product it applies to must NOT be disposed of
together with ordinary domestic or industrial waste but must be sent
to a differentiated waste collection system.
The end user is therefore invited to contact the supplier of the device,
whether the Parent Company or a retailer, to initiate the collection
and disposal process after checking the contractual terms and
conditions of sale.

Troubleshooting

Tab. 2
SYMPTOM
3. With the switch in ON
position, no LED are ON.
4. With the switch in ON
position, the LED L1 is
blinking and L2 is OFF.
Ion Pump Battery Power Supply / 87-900-111-01 (E)
POSSIBLE CAUSE
The battery is exhausted.
The current that supplies
the pump is < 50 nA.
Discharge is not activated
and the pump does not
work.
Instructions for Use

Disposal

FIXING
Change the battery.
Increase the pressure inside
the pump (ex. by heating the
pump), discharge is
activated and L1 goes OFF
and L2 starts blinking.
4
59/68