Naming (Inputting Characters); Selecting A Note Type; Note (Key) And Velocity Settings - Yamaha MOXF6 Owner's Manual

Basic Operation

Naming (inputting characters)

You can freely name the data you've created, such as Voices,
Performances, Songs, Patterns and files saved to a USB
flash memory device. When the cursor is located on such a
naming parameter, the "CHAR" icon appears at the lower
right corner of the display. When pressing the [SF6] button in
this status, the Input Character window appears as shown
below.
In the Edit area, you can move the cursor to determine the
location at which the character is to be input by pressing the
[<] or [>] button while holding the [SF6] button.
In the Character List, you can move the cursor to determine
the character to be input by rotating the [DATA] dial or
pressing the [INC] or [DEC] button while holding the [SHIFT]
button. After completing the character input, press the
[ENTER] button to actually enter the currently edited name
and exit from this status.
Editing area
22
MOXF6/MOXF8 Owner's Manual
Character List

Selecting a note type

When the cursor is located on a parameter for which note
types are to be set, the note icon appears at the lower right
corner indicating that you can call up the Note Type selection
window by pressing the [SF6] button. You can specify the
note type by pressing the [F1] – [F5] buttons and the [SF1] –
[SF5] buttons.
Note Type selection
window

Note (Key) and Velocity settings

Several parameters let you set a key range or velocity range
for a function—for example, in setting up a keyboard
split—by specifying certain note values. You can use the
[INC] and [DEC] buttons or [DATA] dial to set these
parameters, or you can directly enter the values from the
keyboard by pressing the appropriate keys. When the cursor
is located on such a parameter, the "KBD" icon appears at
the lower right corner of the display. You can set the note or
velocity directly from the keyboard by holding down the
[SF6] button and pressing the desired key.