GE MONOGRAM ZIF36NM Dimension Manual

Monogram. Monogram.
" "
ZIF36NM – GE Monogram 36" Built-In All-Freezer
Enclosure Cutout and Product Dimensions (in inches)
10-3/4" Max.
10" Min.
24-3/4"
26-3/4"
73-1/2"
4"
• To achieve a flush fit, the finished cutout width must be
35"
Case at least 36" wide.
Width
• In a semi-flush installation, the finished cutout must
be 35-1/2".
• The electrical and water locations must be located as
shown for either type of installation.
35"
Case
Width
26-1/4" 36"
Frame to Frame
Including
Handle
461Dia27
26-1/4"
Including
Handle
*Shipped at 84" installation height. Can be adjusted to
83-1/2" or 84-1/2" with Grille Panel Kits.
Specification Revised 4/05
110156
35" Case
36" Overall
84-1/2" Max.
83-1/2" Min.
24-3/4"
Case
Depth
84*
24-3/4"
Case
Depth
84*
36"
Frame to Frame
ZIF36NMRH, Freezer
Handle on the left side, the door swings left to right.
ZIF36NMLH, Freezer
Handle on the right side, the door swings right to left.
Caution
Refrigerators are much heavier at the top than
at the bottom – be extra careful when moving.
*Finished Width
2-1/2
6
5
24 3/4" Total
84-1/2" max
*Finished Width
Depth
83-1/2" min
Finished
2-1/2
Opening
5 Water Supply
6
5
3-1/2
24 3/4" Total
84-1/2" max
*36" for a flush installation.
Depth
83-1/2" min
35-1/2" Min. for a semi-flush installation.
Finished
Opening
Note: Additional cutout width may be required when side
panels are used. Add side panel thickness to the finished 5 Water Supply
cutout to calculate rough-in width. See installation examples.
3-1/2
For answers to your Monogram,
GE appliance questions, visit our website at
Listed by
GEAppliances.com or call
Underwriters
Laboratories
R
GE Answer Center
Wall View
Electrical
Area
75" From Floor
to Bottom
of Electrical
Wall View
Area
Electrical
5
Area
3-1/2
75" From Floor
to Bottom
of Electrical
Area
5
3-1/2
®
service, 800.626.2000.
® GE Profile ™ or