Table of Contents
Advertisement
Eliminating minor faults yourself
Before you call customer service:
Please check whether you can eliminate the fault yourself based on the following
information.
Customer service will charge you for advice, even if the appliance is still under
guarantee!
Fault
Temperature differs
greatly from the set
value.
Floor of the refrigerator
compartment is wet.
Temperature display
is flashing. Fig. 2/3
is flashing. Fig.
/3
No temperature display
is lit.
is lit.
Possible cause
The outlet hole is blocked.
Fig. 7/A
Appliance door opened
frequently.
Too much food was
placed in the refrigerator
compartment at once.
The ventilation openings
have been covered.
Appliance has been
switched off.
Power failure; the fuse
has been switched off;
the mains plug has not
been inserted properly.
Remedial action
In some cases it is adequate to switch off
the appliance for 5 minutes.
If the temperature is too high, wait a few
hours and check whether the temperature
has approached the set value.
If the temperature is too low, check the
temperature again the next day.
Clean the condensation channel and the outlet
hole (see Cleaning the appliance").
Do not open the door unnecessarily.
Before placing food in the refrigerator
compartment, switch on the super cooling
function.
Remove obstacles.
Press the On/Off button. Fig. 2/1
Check whether the power is on, check the
fuses.
en
11
Advertisement
Table of Contents
