Looking After Your Machine - Filters - Vax C88-P5-B User Manual

Looking After Your Machine – Filters
WARNING: Always switch off and unplug the vacuum cleaner from the electrical socket before assembling, opening or emptying
the dirt container, or before connecting/disconnecting the attachments.
IMPORTANT: For best cleaning results filters require cleaning at least every three months. Do not use your vacuum cleaner
without all of the filters in place.
IMPORTANT: The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat will
automatically turn the unit off.
Emptying and cleaning the dirt container
Remove dirt container
by pushing down the dirt
container release button and
lifting the dirt container.
Cleaning the pre-motor filter
1
Hold the dirt container and
twist the lid anti-clockwise.
4
Tap excess dirt from the filter. Rinse under a tap and leave to dry for 24 hours.
5
Hold the dirt container
and locate the dirt release
button on the rear of the
dirt container.
2
Lift the lid to reveal the
pre-motor filter.
5
40˚C 40˚C
MAX MAX
Hold dirt container over a
bin and press dirt release
button to open, allowing dirt
to fall out.
3
Lift out the pre-motor filter.
6
24hr