Sort Function; Display Filter Function - Kenwood TM-D710A (K type) Instruction Manual

SORT FUNCTION

This function allows you to sort the station list according to
the callsign, date time, or distance.
1 Display the station list.
2 Press [SORT].
• The sort type list appears on the display.
3 Select a sort type.
4 Press the Tuning control.
• "SORTING" appears on the display and sorting begins.
All callsigns are compared and
CALLSIGN
arranged in ascending order.
All received dates and times
are compared and arranged in
DATE/TIME
descending order, with the last
received message listed first.
The distance between the other
station and My station when selecting
the sorting method is calculated, then
DISTANCE
compared and arranged in ascending
order, with the closest station listed
first.
5 The newly sorted station list appears on the display.
• After sorting, when new station data is received, it is added to
the station list without resorting.

DISPLAY FILTER FUNCTION

This function allows you to display only the specified types
of data from the station list.
1 Display the station list.
2 Press [FILTER].
• The filter type list appears on the display.
3 Select a filter type.
4 Press the Tuning control.
• "FILTERING" appears on the display and filtering begins.
DIGIPEATER
WEATHER
MOBILE
OBJECT
KENWOOD
NAVITRA
FREQUENCY
(QSY)
OTHERS
ALL(OFF)
5 The newly filtered station list appears on the display.
• After the display filter function is turned ON, received data is
added to the list but will on be displayed if it matches the filter
type selected.
• For example, with the station list displayed and the display
filter selection set to "WEATHER", all stations not relating to
weather are no longer displayed. If mobile station data is
received at this time, the new data will also not be displayed
as long as the weather filter is active.
APRS-6
Only Digipeater Stations are
displayed.
Only Weather Stations are
displayed.
Only Mobile Stations are displayed.
Only Object Stations are displayed.
Only Kenwood TH-D7, TH-D72,TM-
D700, TM-D710, and RC-D710
Stations are displayed.
Only Navitra Stations starting from
$PNTS are displayed.
Only stations containing frequency
(QSY) data are displayed.
Stations other than those listed
above are displayed.
The filtering function is cancelled,
displaying all stations.