Toshiba A300D User Manual page 115

Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Sleep Mode, you can
turn on the computer by pressing any key. It is effective only for the internal
keyboard and only when the computer is in Sleep Mode.
Enabled
Disabled
USB
USB Keyboard/Mouse/FDD Legacy Emulation
Use this option to enable or disable Legacy USB support. If your operating
system does not support USB, you can still use a USB mouse, keyboard,
and FDD by setting the Legacy USB Support to enable.
USB Sleep and Charge function
This section describes the setting for "USB Sleep and Charge function".
For more information, please refer to the
section in Chapter 4.
The default setting in BIOS Setup is [Disabled]. Changing the setting to
[Enabled] enables the use of this function.
There are two modes, Mode -1 and Mode-2 in [Enabled]. For normal use,
set the setting to Mode-1.
If the function does not work with Mode-1 setting, charge it to Mode-2.
Some external devices may not be able to use this function in either mode.
When this happens, change the setting to [Disabled].
Enabled (Mode-1)
Enabled (Mode-2)
Disabled
LAN
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled
Disabled
User's Manual
Enables the Wake-up on Keyboard function.
Disables the Wake-up on Keyboard function
(Default).
USB Sleep and Charge function
Enables USB Sleep and Charge function.
Enables USB Sleep and Charge function.
Disables USB Sleep and Charge function
(Default).
Enables Built-in LAN function (Default).
Disables Built-in LAN function.
HW Setup
7-3