Table of Contents
Advertisement
Quick Links
DIGITAL ACTIVE SPEAKER SYSTEM
•
1.5 WATTS RMS PER CHANNEL FOR
RICH STEREO SOUND
•
DIGITAL CLASS D AMPLIFIER
•
ROTARY VOLUME CONTROL
•
3.5MM STEREO INPUT PLUG WITH
1.3 METERS CABLE
•
LED POWER ON INDICATOR
•
POLYFOAM ROLLED SPEAKER EDGE
FOR EXTRA BASS
IB-DSP26A-WC-E-072005.pmd
OPERATING INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE
1
MODEL DSP-26A
•
3/4" MYLAR ELECTROPLATED VOICE COILS
•
MAGNETICALLY SHIELDED SPEAKER
ELEMENTS
•
USES 4 "AA" SIZE BATTERIES (NOT
INCLUDED)
•
AC ADAPTOR 9V 750mA (INCLUDED)
•
LINE IN JACK- CONNECTS TO YOUR CD
PLAYER, MP3 PLAYER, COMPUTER OR
ANY AUDIO DEVICE
10/18/2006, 4:35 PM
IB-DSP26A-WC-E-072005
Advertisement
Table of Contents
Summary of Contents for Lenoxx DSP-26A
-
Page 1: Operating Instructions
MODEL DSP-26A DIGITAL ACTIVE SPEAKER SYSTEM OPERATING INSTRUCTIONS • • 1.5 WATTS RMS PER CHANNEL FOR 3/4" MYLAR ELECTROPLATED VOICE COILS • RICH STEREO SOUND MAGNETICALLY SHIELDED SPEAKER • ELEMENTS DIGITAL CLASS D AMPLIFIER • • ROTARY VOLUME CONTROL USES 4 “AA” SIZE BATTERIES (NOT INCLUDED) •... -
Page 2: Location Of Controls
LOCATION OF CONTROLS 1. ADJUSTABLE STAND 2. POLYFOAM ROLLED SPEAKER (L) 3. LED POWER ON INDICATOR 4. VOLUME CONTROL 5. POLYFOAM ROLLED SPEAKER (R) 6. LINE IN JACK (for CD player/MP3 player/Computer) 7. POWER ON/OFF SWITCH 8. AC ADAPTOR JACK 9. -
Page 3: Power Source
POWER SOURCE Power your speaker system by inserting 4 size “AA” fresh alkaline batteries or by connecting the supplied AC ADAPTOR. 1. BATTERY INSTALLATION (batteries not included) 1. Slide the BATTERY DOOR out. 2. Insert 4 size “AA” alkaline batteries, according to the + and markings in the battery compartment. - Page 4 2. AC ADAPTOR (included) The AC adaptor suitable for this speaker system is DC 9V 750mA, with positive center polarity . If you want to replace your adaptor, please choose only this type. Insert the adaptor plug to adaptor jack of the speaker system and connect adaptor to power 120V/60Hz.
- Page 5 4. Adjust speaker system to the best position for listening. FIG. 1 FIG. 2 FIG. 3 FIG. 4 (You can play this speaker system in any of the 4 positions shown above.) 5. Slide the POWER switch of speaker system to OFF position after use (the LED indicator turns off).
-
Page 6: Troubleshooting
TROUBLE SHOOTING Remedy Symptom 1. Is the adaptor cord firmly plugged into the adaptor jack? Insert the AC adaptor plug securely into speaker. 2. Is the power switched to the OFF position? Slide it to ON. No power. 3. Were the batteries inserted correctly? Please make sure 4 size “AA”... -
Page 7: Safety Information
WARNING: To prevent fire or shock hazard, do not expose this appliance to rain or moisture. Do not block or obstruct the ventilation holes at the rear of the set. SAFETY INFORMATION 1. Batteries should only be installed by adult for safety. 2. -
Page 8: Fcc Notes
FCC NOTES: NOTICE FOR USA: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 9: Limited Warranty
During the initial 1 year period after original purchase, we will service the set that is returned to LENOXX ELECTRONICS CORP, prepaid, at no charge. After the initial 1 year period expires, we will exchange, at no charge, any part that is defective, but will charge for the cost of labor, return postage paid by Lenoxx.
Need help?
Do you have a question about the DSP-26A and is the answer not in the manual?
Questions and answers