Cd Operation - Lanzar VBD 1400 Owner's Manual

If both buttons have not pressed for
several seconds, they will retune to
seek tuning mode and "AUTO"
appeared on the display.
• LOCAL/DISTANCE
Press LOC button (2) shortly to select
between local and distant stations.
Local setting for reception of strong
station, and a distant setting for reception
of weaker stations. This function is in
effect during AUTO SEEK operation.
• MONO/STEREO
Press MON button (3) to select
monaural or stereo (Mono reception
for radio stations). You can sometimes
improve reception of distant stations
by selecting mono operation.
• AUTOMATICALLY MEMORY
STORING & PROGRAM SCANNING
- Automatic Memory Storing
Press AMS button (18) for several
seconds, the radio searches from
the current frequency and checks
the signal strength until one cycle
search is finished. And then 6
strongest stations are stored into the
corresponding preset number button.
- Program Scanning
Press AMS button (18) shortly to
scan preset station. When the field
strength level is more than the
threshold level of stop level.
The radio is holding at that preset
number for several seconds with
releasing mute, then searches again.
• STATION STORING
Press any one of the preset buttons
(14) (M1 to M6) to select a station
which had been stored in the memory.
Press this button for several seconds,
current station is stored into the
number button.

CD OPERATION

• SELECT TRACKS
Press TUNE/SKIP/TRACK
(16) or TUNE/SKIP/TRACK
(17) to move to the previous track or
the following track. Track number
shows on display.
Hold TUNE/SKIP/TRACK
(16) or TUNE/SKIP/TRACK
(17) to fast reverse or fast forward.
CD play starts from when you release
the button.
• PAUSE PLAYING
Press PAU button (19) to pause CD
player. Press it again to resume play.
• REPEAT THE SAME TRACK
Press RPT button (21) to continuously
repeat the same track. Press again to
stop repeat.
• PREVIEW ALL TRACKS
Press SCN button (20) to play first
several seconds of each track on the
current disc. Press again to stop intro
and listen to track.
• PLAY ALL TRACKS
Press SHF button (22) to play all tracks
on CD in random order. Press again
to cancel the function.
• EJECT
When the front panel is sliding down,
press EJECT button (24) to stop CD
playing and eject the disc from the disc
slot (5).
NOTE ON CD-R/CD-RW DISCS
• On this unit, in addition to an audio
CD, you can play your original CD-R
or CD-RW that contain audio titles.
• However, depending on the conditions
of the recording equipment or the
CD-R/CD-RW disc itself, some
CD-Rs or CD-RWs cannot be played
on this unit.
• DO NOT stick paper or tape, etc. onto
the label side or the recording side of
any CD-R/CD-RW, as it may cause a
malfunction.
9
-
button
+
button
-
button
+
button