Table of Contents
Advertisement
Radio
Display Indicators
Tuning
Manually
1. Press TUNER to select tuner mode, the display will change to show the current band and frequency.
2. Press
frequency.
Automatic tuning
1. Press TUNER to select tuner mode.
2. After two seconds the display will change to show the current band and frequency.
3. Press and hold
station is reached, auto tuning will stop.
Tuning to a weak FM stations
1. Press
2. Press AUDIO/FM ST on the remote control to switch to Mono mode. This will normally improve the
reception, but the sound will no longer be in stereo.
Preset Stations
When a preset station is selected, the preset number will appear next to the frequency on the display.
Selecting Preset Stations
1. In tuner mode, press TUNER to switch between AM and FM band if necessary.
2. Press OK, then use the remote's numeric keys or
Storing Preset Stations
The unit can store up to 20 stations in the FM and AM wavebands respectively.
1. In tuner mode, press TUNER to switch between AM and FM band.
Storing Preset Stations
The unit can store up to 20 stations in the FM and AM wavebands respectively.
1. In tuner mode, press TUNER to switch between AM and FM band.
Stereo Indicator
ST
M
Hz
or
/
on the Front Panel or use the remote's numeric keys to change the
or
for more than one second to activate auto tuning mode. When a
to tune in a weak FM station manually.
MHz
MHz
M
Hz
M
Hz
Hz
K
M
Hz
FM Frequency Indicator
to select desired preset station.
21
AM Frequency Indicator
Advertisement
Table of Contents
