Overview The network Speed Dome IP Camera transmits digital video and audio data using wire connection. Live video can be monitored and recorded from window-based computer via network. The video encoder supports real-time Main Profile H.264 Full HD resolution. Simultaneous dual streams, H.264/H.264 and H.264/MJPEG, are available for various network applications via speeding or limited bandwidth.
Package Contents Please check the box contains the items listed here. If any item is missing or has defects, DO NOT install or operate the product and contact your dealer for assistance. Indoor Dome Camera Package Hard Ceiling Mount M3 Screw (x3) M4 Screw (x4) Fixing Plate Plastic Anchors (x4)
Page 5
Outdoor Dome Camera Package M3 Standard Screw (x1) M3 Security Screw (x1)* M5 Standard Screw (x1) M5 Security Screw (x1)* Dome Camera with Outdoor Mount Kit Quick Guide Waterproof Rubber CD: Operation Manuals Lubricant Security Torx* Optical Cover *Optional: For Vandal Proof Cover only.
Please refer to the diagrams and tables accompanied with for use of each switch/connector. Indoor Outdoor RJ45 Connector ALARM I/O Power Micro SD Card Slot Factory Reset Button Audio I/O NOTE: DO NOT change the network Speed Dome Camera’s Communication Switch factory default settings.
Connect one end of the Ethernet cable to the RJ-45 connector of the network Speed Dome Camera, and the other end of the cable to the network switch or NOTE: In some cases, you may need use an Ethernet crossover cable when connecting the network Speed Dome Camera directly to the PC.
Apply Alarm I/O The network Speed Dome Camera supports 4 digital alarm inputs and 2 digital alarm output. Please make sure the alarm connections are properly wired before starting to configure alarm related settings on this “Application” page. Please refer to the pin definition table below for alarm system wiring.
System Requirements To perform the network Speed Dome Camera via web browser, please ensure your PC is in good network connection, and meet system requirement as described below. Items Minimum Requirement ® ® ® 1. Intel Pentium IV, 3 GHz or higher, Intel...
Access Camera For initial access to the network Speed Dome Camera, users can search the camera through the installer program: DeviceSearch.exe, which can be found in “DeviceSearch” folder in the supplied CD. Device Search Software Setup Step 1: Double click on the program Device Search.exe. After its window will appear, click the <Device Search>...
Page 12
IP to DHCP, in the finding device list. The way to change the camera’s network property is specified below: Step 1: In the finding device list, click on the network Speed Dome Camera that you would like to change its network property. On the selected item, right click and select <Network Setup>.
Page 13
DC Viewer in the PC previously. Please refer to Upgrade the DC Viewer. Once login to the network Speed Dome Camera, users will see the Home page as shown below: NOTE: Refer to network Speed Dome IP Camera Menu Tree for further button/ function details.
Setup Video Resolution Users can setup Video Resolution on Video Format page of the user-friendly browser-based configuration interface. Video Format can be found under this path: Streaming> Video Format. Video Format Under Video Resolution section, select a preferred resolution setting. The available Video Resolution for MJPEG &...
Appendix A: Technical Specifications Items 18N1 20N1 CAMERA Sensor 1/2.8” Sony Progressive Scan CMOS Sensor Optical Zoom Digital Zoom 1~8x variable Focal Length 4.7~84.6 mm 4.7~94 mm Auto / Manual Focus Mode White Balance Auto/ Indoor/ Outdoor/ ATW Iris Control Auto / Manual 1/30 ~ 1/10k sec.
Appendix B: Delete the Existing DC Viewer For users who have installed the DC Viewer in the PC previously, please first remove the existing DC Viewer from the PC before accessing to the network Speed Dome Camera. Deleting the DC Viewer Activate <Control Panel>, and then double click <Add or Remove Programs>.
Step 4: Down the page, click on the <Default Level> button and click <OK> to confirm the setting. Close the browser window, and restart a new one later to access the network Speed Dome Camera. ActiveX Controls and Plug-ins Settings Step 1: Repeat Step 1~3 of the previous section above.