8
ASSEMBLING AND PREPARING
Detaching the Stand Base
1
Place the monitor with the screen side down on
a flat and cushioned surface.
2
Turn the screw to the left, and then pull out the
Stand Base from the Stand Body.
3
Remove 2 screws and pull out the Stand Body
from the monitor.
Mounting on a table
1
Lift and tilt the Monitor set into its upright
position on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
10 cm
2
Connect the AC-DC Adapter and Power Cord
to a wall outlet.
or
CAUTION
Connect the power cable at the back of the
monitor to prevent it from being caught in the
stand body.
10 cm
10 cm