Yamaha BD-A1010 Owner's Manual page 9

A TOP MENU
BD DVD
screen (p. 42) if the disc contains a menu. Select the
desired item using 5/a /2/3 and ENTER.
Note
– Specific operations may be different depending on
the disc. Follow the instructions of each menu
screen.
B Cursor buttons (5/a /2/3): Moves the focus in
the menu screen.
ENTER: Selects the focused menu/item.
C RETURN: Returns to the previous menu or screen,
etc.
D SUBTITLE
BD DVD
languages (p. 42) if available . You can also select this
item from On Screen menu (p. 23).
E STATUS: Displays the playback information (p. 24).
F Control buttons
BD DVD CD VIDEO
/
BD DVD CD VIDEO
Searches backward/forward. The search speed will
change each time you press the button (search
backward/forward: 5 steps each). Press
normal playback.
: Changes the speed of a slide show (slower/
PHOTO
faster: 3 steps).
/ BD DVD
Press and hold for instant search/replay. Instant search
skips the content 30 seconds. Instant replay replays
the content from 10 seconds before.
/ : Skips backward/forward.
: Stops playback. To stop playback completely,
press this button twice.
: Pauses playback.
: Plays back contents.
( )/ ( )
BD DVD : Performs slow backward/forward. Slow
playback speed will change each time you press the
button (slow backward/forward: 4 steps each).
These buttons also perform frame advance/reverse
playback during pause.
Press to resume normal playback.
Many DVD-Audio discs include slide show and page
turn capabilities. Press
next page. This function is only for DVD-Audio.
Notes
– Some BD/DVD discs are not compatible with frame
advance/reverse playback.
: Displays the top menu
: Changes subtitle
VIDEO
MUSIC PHOTO
:
MUSIC
to resume
CD VIDEO MUSIC :
/ to move to a previous/
– Depending on the disc, this Player resumes playback
from the point that where the Player was previously
stopped. To play back from the beginning, press
twice and then .
G SA-CD/CD: Switches the playback layer of a hybrid
SA-CD between SA-CD and CD (p. 4).
Hint
– The SA-CD/CD indicator (p. 5) on the front panel
lights up when an SA-CD is loaded and the SA-CD
layer is selected (p. 34).
Notes
– Audio signals are only output from the AUDIO OUT
jacks (p. 11) while the SA-CD layer is selected.
– Audio signals recorded in DSD multi-channel format
cannot be played on this Player.
H PURE DIRECT: Changes Pure Direct mode. Pure
Direct mode shown below will change each time you
press the button. Pure Direct mode improves audio
quality. PURE DIRECT on the front panel lights up
when Pure Direct mode is set to mode 1/mode 2.
Mode 1: Front panel display is turned off, and video
signals are not output. This mode is suitable listening
audio.
Mode 2: Front panel display is turned off, and video
signals from other than HDMI terminal are not output.
This mode is suitable for watching movies with high
quality sound.
off: Normal play back.
I DIMMER: Changes brightness of the front panel
display in 5 steps.
J DIGEST
: Shows 12 photo thumbnails.
PHOTO
When thumbnails are displayed, you can proceed to
the next/previous page with
: Displays Bookmark select bar
DVD VIDEO
(p. 25).
K p: Turns this Player on or sets it to the standby mode.
L ZOOM
DVD VIDEO
The size of the screen will change each time you press
the button (zoom in/out: 3 steps each).
Continued to the next page. \
CONTROLS AND FUNCTIONS
/ .
: Zooms in/out.
PHOTO
7
En
1