GE 2931SST 2-931SST User Manual page 27

Problem
Cannot hear phone
You experience
noise, or fading in
and out
Unit beeps
Cannot hear the
PAGE/FIND tone
Range is shorter
Battery will not hold
a charge
Memory Dialing
does not work
Solution
• Press VOLUME button on the handset.
• Charge battery.
• Is handset out of range? Move closer to the base.
• Relocate the base unit away from TV's computers, micro
waves or any other appliances or electronic devices that
may cause interference.
• Make sure base is not plugged into an outlet with
another household appliance.
• You may be receiving an out-of-range alert, move closer
to the base.
• Place handset in base for 10 seconds to reset the
phone. The CHARGE/IN USE comes on when reset is
successful.
• Put handset in base for 12 hours to recharge battery.
• Clean charging contacts on handset and base with a soft
cloth or an eraser.
• See solutions for "No dial tone."
• Replace battery.
• Set the RINGER to ON.
• Position the base antenna upward.
than normal
• Be sure you are sufficiently charging the battery.
The battery should be charged for 12 hours.
• Make sure battery contacts on both the handset and the
base are making contact and are clean; free of dirt or lint.
• When the handset is placed in the base, make sure that
the base CHARGE/IN USE light is on.
• Memory location must be 2 digits (i.e, 01,02, etc.).
• Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?
• Make sure TONE/PULSE switch is correctly set.
27