Dvr Description; Power Supply; Working Mode - Eonon HD 720P DVR User Manual

☞DVR Description

Power supply:

● Use build-in rechargeable lithium battery.
NOTE: built-in battery just for delay recording 1hour (capacity—600mAH)
● Use external DC 12V power supply:
When the mirror getting the power . it will open automatically
when it is connected to the power cable. You need touch and hold "▼"to make DVR in
video mode
When you remove the power cable, DVR will automatically shut down after 10 seconds.

Working mode:

DVR has three working mode: video mode, snapshot mode and playback mode.
You can choose anyone as you like.
After connecting to the power cable, you need touch and hold
DVR in video mode. You can press power button for more than two seconds to
shutdown DVR in any working mode.
(Note: Please insert TF card before using, or else have been prompted to "NO CARD" word)
●Video mode:
When DVR is working in video mode:
1. Press snapshot button to enter snapshot mode.
2. Press "M" button for more than two seconds to enter playback mode.
3. Press video button to start recording if DVR is not in recording, and press video button
again to stop recording.
4. Press power button less than two seconds to open VIDEO menu while DVR is not in
recording.
●Snapshot mode:
When DVR is working in snapshot mode:
1. Press video button to enter video mode.
Press "M" button for more than two seconds to enter playback mode.
2.
Press snapshot button to take a picture if the TF card is inserted.
3.
Press power button less than two seconds to open CAPTURE menu.
4.
●Playback mode:
When DVR is working in playback mode:
1. Press video button to preview next film/picture.
2. Press snapshot button to pewview last film/picture.
3. Press "M" button less than two seconds to play/stop current film.
4. Press "M" button for more than two seconds to enter video mode.
5. Press Power button less than two seconds to open PLAYBACK menu if DVR is not in
playing films.
"▼"to make