Philips BTD7170 User Manual page 28

Audio or subtitle languages cannot be set
•
The disc is not recorded with sound or
subtitles in multiple languages.
•
The audio or subtitle language setting is
prohibited on the disc.
When you switch on the TV, the home theater
automatically switches on.
• This behavior is normal when you are using
Philips EasyLink (HDMI-CEC). To make the
home theater work independently, switch
off EasyLink.
No disc detected
•
Insert a disc.
•
Check if the disc is inserted upside down.
•
Wait until the moisture condensation at
the lens has cleared.
• Replace or clean the disc.
•
Use a finalized CD or correct format disc.
Disc does not play
•
Insert a readable disc with the label side
facing you.
•
Check the disc type, color system and
regional code. Check for any scratches or
smudges on the disc.
•
Press to exit the system setup menu.
•
Disable the password for parental control
or change the rating level.
•
Moisture has condensed inside the system.
Remove the disc and leave the system
turned on for about an hour. Disconnect
and reconnect the AC power plug, and
then turn on the system again.
No picture
•
Check the video connection.
•
Turn on the TV to the correct Video-In
channel.
Black and white or distorted picture
• The disc does not match the TV color
system standard (PAL/NTSC).
•
Sometimes a slight picture distortion may
appear. This is not a malfunction.
•
Clean the disc.
EN
26
The aspect ratio of the TV screen cannot be
changed even though you have set the TV
display format.
•
The aspect ratio is fixed on the loaded
DVD disc.
•
The aspect ratio may not be changed for
some TV systems.
DivX video files cannot be played.
•
Ensure that the DivX video file is
complete.
•
Ensure that the file extension is correct.
•
Due to Digital Rights issue, the DRM-
protected video files cannot be played
through an analog video connection (e.g.
composite, component and scart). Transfer
the video content onto the Disc Media
and play these files.
EasyLink does not work.
• Make sure that the home theater is
connected to a Philips brand EasyLink TV,
and the EasyLink option is turned on.
• For TVs from different manufacturers, the
HDMI CEC could be called differently.
Check theTV user manual on how to
enable it.
Cannot display some files in USB device
•
The number of folders or files in the USB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
•
The formats of these files are not
supported.
USB device not supported
•
The USB device is incompatible with the
unit. Try another one.
Poor radio reception
•
Increase the distance between the unit and
your TV or VCR.
• Fully extend the FM antenna.
Poor radio reception
• Increase the distance between the unit and
your TV or VCR.
•
Connect and fully extend supplied antenna.