Advertisement
DESCRIPTION
A ON/STAND-BY button
B +/- Adjustment buttons
C Oscillation button
D ECONOMY mode button
E Timer button
F MODE button
(for selecting the operating mode)
G Receiver for remote control
H Power indicator light
I Back cover
J Filter
ELECTRICAL CONNECTIONS
-
Before plugging into the mains, make sure the voltage
of your mains supply corresponds to the V value indica-
ted on the appliance and that the socket and power
line are appropriate for the load required.
-
THIS APPLIANCE COMPLIES WITH DIRECTIVE
2004/108/EEC ON RADIO INTERFERENCE SUPPRESSION.
INSTALLATION
The appliance can be used on any horizontal surface.
Do not overload the electrical circuit. Avoid using the same
socket for other appliances.
OPERATION AND USE
1. Connect the appliance to the power outlet.
2. The appliance emits a beep and the power indicator
light (H) comes on and remains on as long as the
appliance is powered.
3. The appliance goes into STAND-BY.
If the display shows a blinking dot, it means that the
tip over switch has been activated. See paragraph:
"Additional safety features" page 4.
4. Press the ON/STAND-BY button (A) to turn on the
appliance. It will begin to heat with the predefined
settings.
5. Press the MODE button (F) to select one of the fol-
lowing functions available:
Ventilation (
)
Anti-freeze (
Heating at minimum power (1)
mum power (2)
5.1 Ventilation (
In this operating mode only the fan operates, so
the appliance does not heat the room.
5.2 Anti-freeze (
In this operating mode the appliance keeps the
room at a temperature of 7°C (45°F) to prevent
freezing temperatures.
5.3 Heating 1 and Heating 2
In this operating mode you can set the desired
)
Heating at maxi-
)
)
temperature by pressing the + and - adjustment
buttons (B).
Heating 1 (minimum power level):
The appliance operates at the minimum power
reducing energy consumption to the minimum.
Heating 2 (maximum power level):
The appliance operates at the maximum power
for rapid heating of the room.
6. ECONOMY MODE
In this operating mode the appliance will automatically
set the power level to guarantee the best comfort redu-
cing the energy consumption. In this operating mode the
unit may switch the heating power level from maximum
to minimum and viceversa, several time in an hour. The
maximum temperature setting is 26°C (79°F). To activate
this function, press the ECO button (D).
7. If you want the appliance to distribute the airflow over
a larger area, press the oscillation button (C) (
The appliance will then oscillate right and left. To stop
the oscillation in the desired position, just press oscilla-
tion button (C) again.
8. To turn off the appliance press button ON/STAND-BY
(A). The display could show the count down for about
6 seconds.
NOTE: The display can show the temperature in both °C and
°F. To change the temperature scale, press and hold the +
key for few seconds, then release.
24-HOUR DIGITAL TIMER
This function can be activated from any operating mode.
Delayed switch-on: with the appliance in the STAND-BY
position, press the timer button (E) (
The display shows the symbol
ning before switch-on. To set the timer, use the + and -
adjustment buttons (B), then wait a few seconds for the
programming to be set.
The display shows the symbol
set the timer. When the programmed time has been rea-
ched, the appliance turns on with the same settings it
had during the previous operation.
Delayed shut-off: With the appliance on, press the timer
button (E) (
). The display shows the symbol
the time remaining before shut-off.
To set the timer, use the + and - adjustment buttons (B),
then wait a few seconds for the programming to be set.
The display returns to show the current settings and the
symbol
to indicate you have set the timer. When the
programmed time as been reached the appliance shuts
off automatically.
If you want to go back to operation without the timer, press
the timer button (F) twice. The timer symbol
from the display.
).
).
and the time remai-
to indicate you have
and
disappears
3
Advertisement
